OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0245

Driver Window Switch Circuit

B0245 is unknown to every publicly available J2012 source and undocumented by carmakers, so nothing public backs it; driver window faults have the code B0500. The driver's door usually holds the master switch block, which commands its own window and, by signal lines or a bus, the other doors. Honda's patent US7145299B2 replaces two heavy wires per door with a single line that the master ties to battery for up, to ground for down and leaves floating for stop, so contact wear and relay surges no longer stress the switch. A circuit code here means the module sees a switch state that cannot be right, such as a contact held closed by corrosion or a broken line. Windows that can close on their own must reverse before pressing 100 N under FMVSS 118.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 45

Possible causes

  • Master switch contacts corroded or sticking, often after drinks or rain got into the door panel high
  • Wires broken in the rubber boot between body and driver's door medium
  • Plug of the switch block loose or with pushed-back pins low

Symptoms

  • Driver's window or other windows do not respond to the master switch
  • A window moves on its own or the one-touch function misbehaves

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0245

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication