OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0237

Backup Lamp Circuit

Neither the publicly available J2012 lists nor any public service literature mention B0237, so it remains unconfirmed. In the words of FMVSS 108, backup lamps light the road behind the car and warn pedestrians and drivers that it is reversing or about to. HELLA notes that the circuit may only be live with the ignition on and reverse engaged. Manual gearboxes close a plunger switch in reverse; on automatics the range sensor or the transmission controller supplies the signal. In patent US5065135A, held by Automotive Products, logic that decodes the selector position energises a relay feeding the lamp for as long as reverse is reported. A fault leaves the lamps dark in reverse, or lit outside reverse when the line is shorted to supply.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 37

Possible causes

  • Reverse light switch on the gearbox worn or its plug corroded by road spray high
  • Reversing lamp bulb burnt out or LED unit failed medium
  • Missing reverse signal from the range sensor or transmission module on automatics low
  • Broken wire in the tailgate harness feeding the lamp low

Symptoms

  • Reversing lamps stay dark with reverse gear engaged
  • Reversing lamps lit while driving forward

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0237

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication