OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0231

Front Marker Lamp Circuit

B0231 is found neither in any publicly available J2012 list nor in public service documents of a carmaker, so the code cannot be verified. The title points to the front marker or position lamps. FMVSS 108 places side marker lamps close to the leading and trailing ends of the body so that, seen from the side, they reveal how long the vehicle is. HELLA lists front marker lights as white, or amber where the headlamps are amber, and mandatory on vehicles wider than 1600 mm. They normally light in the park position of the light switch. A module that switches them electronically can spot a missing load: Ford's patent US4667187A briefly toggles each lamp for about 300 µs and flags a fault when no current change follows. Expect a dark marker lamp and, where fitted, a bulb warning.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 31

Possible causes

  • Bulb or LED module of the marker lamp failed high
  • Corroded bulb holder or plug in the headlamp area, where spray water reaches it medium
  • Feed or ground wire to the front lamp open or shorted low

Symptoms

  • One front marker or position lamp stays dark with parking lights on
  • Bulb failure warning in the instrument cluster, where the car has one

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0231

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication