OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0228

Front Fog Lamp Circuit

B0228 appears in none of the publicly available J2012 lists, and no carmaker publishes it as a fog lamp code. General Motors does use the number, but inside climate control: bulletin PIT5383 lists B0228 among the HVAC codes of 2015 Cadillac, Chevrolet and GMC models whose K33 climate module needed new software; GM does not publish its exact wording. Read as titled, the code concerns the drive of the front fog lamps. In patent US8125101B1 the fog switch grounds dedicated signal lines that act straight on the fog lamp relays; in US7230350B2 a fog switch shifts the voltage on the headlamp switch resistor chain, and the controller then adds the fog function. A circuit fault leaves the lamps dark or hides the request from the module.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 28

Possible causes

  • Fog lamp relay or fuse failed, so the lamps get no supply although the switch is on high
  • Low-mounted harness in the front bumper torn or corroded, often after a parking knock or water ingress medium
  • Bulb burnt out or lamp housing flooded through a cracked lens medium
  • Fog position of the light switch worn or its signal line open low

Symptoms

  • Front fog lamps stay dark although the switch is on
  • Fog lamp indicator lights up but only one lamp or none works

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for B0228

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication