OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0223

Recirculate Position Command 1 Circuit

B0223 does not appear in the publicly available J2012 lists, but General Motors uses it for the recirculation door actuator. On GM Global A cars such as the Saab 9-5 and 9-4X of model year 2011 that actuator is a stepper motor with four control lines; B0223 01 means command circuit 1 is shorted to battery, B0223 06 that it is open or low. The module only checks the outputs when the motor starts to move, not while it runs or once the target is reached; it then switches the output off and deactivates that motor. B022A is the second recirculation command circuit. GM bulletin PIT5383A for 2015 Buick, Cadillac, Chevrolet and GMC models lists B0223 among HVAC codes and inoperative recirculation, fixed by reprogramming the HVAC module. The airbag lamp meaning once given here belongs to B00D2 in J2012.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 23

Possible causes

  • Recirculation door stepper motor faulty or its gears stripped high
  • Control line 1 to the actuator open, grounded or shorted to battery voltage medium
  • HVAC control module software, as in GM bulletin PIT5383A, or module output stage low

Symptoms

  • Recirculation cannot be switched on or off
  • Windows mist up or outside smells get in because the door is stuck

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0223

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication