B0210
Rain Sensor Module
No publicly available J2012 table mentions B0210, and no carmaker documents it; lost or invalid communication with a rain sensing module is covered by U0231 and U0532. The sensor is mounted behind the windscreen, inside the car and within the wiped area. According to HELLA, light-emitting diodes shine infrared light through a prism into the glass; on a dry screen it is totally reflected to a photodiode, while drops let part of it escape. A gel pad couples the sensor optically to the glass, and a poorly fitted pad can cause malfunctions. From the received light the electronics estimate the rain and set the wiper interval, switching to the highest stage in heavy spray. HELLA's fourth generation also reports streaks and dirt. If the sensor fails, the wiper module falls back to normal interval wiping.
Possible causes
- Gel pad aged or with air bubbles, often after a windscreen replacement high
- Rain sensor electronics failed or moisture inside the housing medium
- Supply or data wire to the sensor at the headliner damaged low
Symptoms
- Automatic wiping does not react to rain or wipes on a dry screen
- Wipers only work in fixed interval or manual stages
- Automatic headlamps may also stop working on combined rain/light sensors
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0210
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.