OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0200

Air Bag System Voltage Out of Range

B0200 is not documented in public: no publicly available J2012 list and no carmaker uses it with this meaning. What the title describes is real. An airbag control unit runs from the vehicle battery and needs a stable supply to fire reliably; Bosch rates its commercial vehicle unit for 8.5 to 32 V. An energy reserve capacitor, 2 x 4.2 mF in that unit, keeps it working for a defined autonomy time if the battery is torn off in a crash (Bosch EP1526986B1). Airbag system chips such as Bosch CG903 monitor their supply voltages and test the reserve capacitor all the time. A patent for an airbag ECU (US20140142812A1) logs how long the supply stayed in a set range, for instance during cranking dips. Outside the range the module turns on the airbag lamp, the readiness indicator FMVSS 208 demands.

SystemBody
Typegeneric / SAE
GroupB0
Range / number2 / 00

Possible causes

  • Weak battery or charging fault letting system voltage sag, often while cranking high
  • Poor ground or loose supply pin at the airbag control unit connector, or a corroded fuse contact medium
  • Airbag control unit faulty, for example its internal supply or reserve capacitor low

Symptoms

  • Airbag warning lamp on, sometimes only after a cold start or jump start
  • Other modules may also log low-voltage faults
  • Safety note: airbags may not deploy while the fault is present; work on the system only with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0200

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication