OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0186

Front Blower Motor Speed Performance

B0186 is not in the publicly available J2012 lists, and no manufacturer uses it for front blower speed. Saab assigns it to the solar sensor of the 9-3: B0186 01 is a short to B+ in that circuit, after which the climate control assumes cloudy weather. A speed performance fault, as the title puts it, differs from the circuit faults B0181 and B0283: the wiring is intact, but the fan does not turn at the commanded speed. Denso's patent US10300764B2 shows how a blower control module checks this with a Hall sensor. If the rotor has not moved after about 2.7 s it reports a locked rotor to the climate module, power is cut and a in one example a restart follows after 20 s, five times at most until the next start. US5554913A names the classic cause: foreign objects sucked into the intake jam the wheel.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 86

Possible causes

  • Leaves or other debris drawn in through the air intake, braking or jamming the fan wheel high
  • Worn blower motor bearings or brushes, motor runs slowly or stalls medium
  • Heavily clogged cabin filter loading the motor low

Symptoms

  • Blower speed does not match the selected stage or fluctuates
  • Fan stops and restarts after a pause, sometimes with a grinding noise

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0186

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication