OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0184

Rear Blower Motor Circuit

No publicly available J2012 list includes B0184, and no maker documents it as a rear blower code. In Saab's 9-3 climate control the number belongs to the solar sensor: B0184 06 means that circuit is open or shorted to ground, and the system then regulates as on an overcast day. GM's Global A models report a rear blower speed circuit fault as B0208; GM bulletin PIT5383A lists B0208 among the HVAC codes of several 2015 GM models. Rear blowers serve the second and third rows of vans and large SUVs. In the 2011 Saab 9-5 an auxiliary blower module converts a PWM command into a motor voltage between 2 and 13 V, and a grounded, open or shorted command line stops the rear fan. A Hyundai patent notes that a stalled HVAC motor can draw several hundred mA. A related code is B0330.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 84

Possible causes

  • Long harness run to the rear blower open or shorted, often at body joints or under trim high
  • Auxiliary blower control module or rear resistor failed medium
  • Rear blower motor worn or blocked by debris drawn in through the rear intake medium

Symptoms

  • No airflow from the rear roof or floor vents
  • Rear seats stay warm in summer or cold in winter while the front is comfortable

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0184

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication