OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0181

Front Blower Motor Circuit Low

B0181 is missing from every publicly available J2012 code list, and no carmaker publishes it as a front blower code. Saab does use the number, for something else: its 9-3 climate control stores B0181 05 when the left floor air mix temperature sensor input rises above 4.8 V, i.e. open or shorted to B+. In GM's later Global A climate control the front blower speed circuit is B0193; a general blower circuit has the code B0283. Read as titled, a circuit low fault means the blower feed or speed line sits too low. In the 2011 Saab 9-5 the climate module sends a PWM command that the blower module turns into 2 to 13 V at the motor; with that line grounded or open the fan stops. Older systems step the speed through resistor paths instead.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 81

Possible causes

  • Speed command line between climate module and blower module open or chafed to ground high
  • Blower control module or series resistor burnt out, often after a sluggish motor drew too much current medium
  • Blown fuse or melted connector in the blower power feed low

Symptoms

  • Front blower does not run at all or only at the highest stage
  • Windscreen demists slowly because almost no air reaches it

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0181

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication