B0164
Air Bag In-Vehicle Temperature Sensor Circuit
B0164 is not listed in any publicly available J2012 table. General Motors does use the number: bulletin PIP5094 from 2013 lists it as a service information keyword, but no public GM text gives its wording. The airbag meaning in the title is not documented by any carmaker. GM's neighbouring code B0163 is the passenger compartment sensor of the HVAC system, which makes a climate control meaning more likely than an airbag one. Temperature sensing for airbags does exist: Delphi's US7000946B2 adjusts restraint output to the measured inflator temperature, using the control chip's own die temperature as a guide, and Bosch's US5697639A puts a temperature sensor inside the airbag module. Treat any B0164 by the make's own definition.
Possible causes
- Temperature sensor or its wiring open or shorted medium
- GM: fault in the climate control sensor group around B0163 rather than the airbag medium
- Internal temperature measurement of the control module faulty low
Symptoms
- Airbag or climate warning, depending on which module stored the code
- Climate control may run on a substitute cabin temperature
- Safety note: if the airbag module is involved, work only with the battery disconnected and the wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0164
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.