B0162
Sun Load Sensor 2 Circuit
No public carmaker source and no publicly available J2012 list covers B0162. The title implies a second sun load channel, as used for dual-zone climate control: Eaton's patent US5957375A describes a sensor that sees how much sun reaches separate areas of the cabin so each side can be cooled on its own. US6888120B2 achieves this with two lenses and two photodiodes split by an opaque section, one for the driver and one for the passenger side. GM, by contrast, covers its whole multi-zone sensor with one code, B0183, in the 2011 Saab 9-4X; if no value is available the module assumes 0 W/m², 45° elevation and −75° azimuth. Losing the second channel leaves one side poorly compensated.
Possible causes
- Second photodiode or channel of a dual-zone sun sensor failed high
- Connector of the sensor in the dash top cover loose or damaged medium
- Signal wire of the second channel open or shorted low
Symptoms
- One side of the cabin gets too warm in sun while the other is fine
- Dual-zone automatic reacts to sunshine only on one side
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0162
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.