B0160
In-Vehicle Temperature Sensor Circuit
B0160 is not among the publicly available J2012 entries, and no maker publishes it with this meaning; a similar title belongs to B0250. The in-car sensor tells automatic climate control the actual cabin temperature. To read real cabin air it is usually aspirated: Denso's patent US20040016537A1 draws cabin air across the sensor with an aspirator fed by the HVAC case, so air keeps flowing in every mode. Manufacturers use other numbers for this circuit. In GM's Global A system, as in the 2011 Saab 9-5, B0163 covers the passenger compartment sensor with limits of 0.1 and 4.9 V. Older Saab 9-3 models use B0165 when the input drops below 0.2 V (grounded) and B0166 for an open.
Possible causes
- Thermistor in the in-car sensor open or shorted high
- Sensor plug behind the dash or headliner loose or corroded medium
- Signal or reference wire damaged during interior work low
Symptoms
- Automatic climate control overheats or overcools the cabin
- Blower speed does not settle as the cabin reaches the set temperature
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0160
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.