OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0159

Outside Temperature Sensor Range/Performance

No public J2012 source lists B0159. General Motors uses it: bulletin PIP5094 from 2013 lists B0159 among its service information keywords, though without a description, so no public GM text states the exact fault logic. Its neighbour B0158 is GM's outside air sensor circuit code. The sensor is an NTC thermistor behind the front bumper; per the 2011 Saab 9-5 manual the cluster supplies 5 V, sees high resistance and voltage when it is cold and low values when it is hot. A range/performance fault, unlike B0158, concerns a signal that stays inside the electrical limits but is implausible, for example frozen at one value or far from what other temperatures suggest. Result: wrong outside reading.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 59

Possible causes

  • Outside air sensor drifted or slow to react, giving plausible but wrong values high
  • Sensor mounted where engine or road heat reaches it, e.g. after a bumper repair medium
  • Corroded contact adding resistance and shifting the reading low

Symptoms

  • Displayed outside temperature clearly too high or too low
  • Climate control or A/C compressor behaves oddly because of the wrong outside value

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0159

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication