B0158
Ambient Air Temperature Sensor Circuit
Although B0158 is absent from the publicly available J2012 lists, General Motors and Saab use it with exactly this meaning. In the 2011 Saab 9-4X the instrument cluster reads the outside air sensor and stores B0158 02 when the signal implies more than 88 °C, B0158 05 below −40 °C; the display then shows dashes. Saab 9-3 manuals place it in the body module: under 0.25 V means short to ground, above 5 V means open or short to supply, and the last known value is kept. GM bulletin PIC5656F (LaCrosse 2010–13, Verano 2012–16, Malibu 2013–16, Cascada 2017) links B0158 to a missing outside temperature and an HVAC display stuck in Celsius, and starts with the sensor plug and circuits 61 and 636.
Possible causes
- Sensor at the front bumper unplugged or connector damaged after front-end work high
- Thermistor in the outside air sensor open or shorted, often after stone impact medium
- Signal or low reference wire to the cluster damaged medium
Symptoms
- Outside temperature display missing or showing dashes
- Automatic climate control works with a stored or default temperature
- On some GM models the HVAC display switches to Celsius
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0158
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- saabwisonline.com/9-4x/2011/3-electrical-system/driver-information-main-instrument-unit-and-sid/fault-diagnosis-diagnostic-trouble-codes/dtc-b0158
- saabwisonline.com/9-3-9440/2007/dtcs/bcm/b0158-02/
- saabwisonline.com/9-3-9440/2007/dtcs/bcm/b0158-05/
- static.nhtsa.gov/odi/tsbs/2019/MC-10154291-9999.pdf