OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0150

HVAC Mode Door Range/Performance

No publicly available J2012 code list includes B0150, and no carmaker publishes it with this meaning. The mode door decides whether air leaves at the face vents, the footwell or the windscreen. A range/performance fault means the door does not reach the commanded position or its feedback does not fit the command. Many actuators carry a potentiometer geared to the motor that returns roughly 0 to 5 V, as a Motor magazine article explains; Calsonic's patent EP0771679A2 pairs each door motor with such a position detector. GM's Global A climate control, as documented for the 2011 Saab 9-5, uses stepper motors and logs mode actuator circuit faults under B0233 instead. Expect air from the wrong outlets or a door that hunts.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 50

Possible causes

  • Mode door or its linkage binding, broken lever or stripped gear high
  • Mode door actuator worn, feedback track of the potentiometer dirty medium
  • End positions not relearned after actuator replacement low

Symptoms

  • Air comes out of the wrong vents or the selected mode is not reached
  • Clicking or knocking behind the dashboard while the door moves
  • Windscreen demisting weaker because too little air reaches the defrost outlets

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0150

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication