B0133
A/V Sensor Washer Fluid E Control Circuit
B0133 covers the control circuit of A/V sensor washer fluid E, the fifth channel after B012F to B0132. Autonomous vehicles carry many cameras and lidar units, so cleaning is split into several separately switched fluid paths. Uber's patent US10220817B2 shows a sensor platform whose grooves and raised rim carry fluid and air to the sensor heads. Kautex says its Allegro control software assigns priority among the sensors when coordinating the actuators. In a lab study on lidar windows, results depended above all on the kind of deposit, its density and whether it had dried. Which sensor is on channel E is not disclosed, and no carmaker documents B0133. If the channel stays switched off, deposits on that sensor are no longer removed.
Possible causes
- Pump or valve of channel E defective, coil open or shorted high
- Water ingress or corrosion in the connector of channel E medium
- Output for channel E in the cleaning control module damaged low
Symptoms
- The sensor on channel E keeps a film of dirt or dried spray
- Message that a sensor is blocked or an assistance function is unavailable
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0133
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.