B0132
A/V Sensor Washer Fluid D Control Circuit
B0132 concerns washer fluid channel D of a self-driving vehicle's sensor cleaning, the fourth in the series that starts at B012F. In Uber's patent US10173646B1 the vehicle computer judges how dirty each sensor is and then works out a cleaning order, so the cleaning units fire one after another instead of all at once; a dead channel removes one sensor from that rotation. Rain, snow, road salt, pollen, insect remains and bird droppings are the deposits named there. A KTH thesis written for Scania compared cleaning methods for heavy autonomous trucks and tuned fluid use by varying pump output. Nobody publishes which sensor sits on channel D, and no carmaker documents B0132. Typical faults are an open pump circuit or a short in its supply.
Possible causes
- Open circuit in the channel D pump or valve, often a burnt-out winding high
- Supply or control lead of channel D shorted to ground or battery voltage medium
- Pump blocked by frozen or contaminated fluid, drawing excess current low
Symptoms
- Sensor D is skipped in the cleaning sequence and stays dirty
- Automated driving may limit itself or ask the driver to take over
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0132
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.