B0131
A/V Sensor Washer Fluid C Control Circuit
B0131 points to the circuit that switches A/V sensor washer fluid C, the third channel of the B012F to B0134 series for autonomous vehicle sensors. Ford's patent US10569746B2 describes a rotating sensor cover: the computer first tries a contactless cleaner with fluid or air and only brings in a wiper when the window's measured opacity stays above a limit. A Korean lab study of lidar windows ran its washer at 0.5 bar and its air jet at 2 bar and found the type of dirt, its concentration and whether it had dried to matter most. No carmaker documents B0131 with this meaning. General Motors lists B0131 among the keywords of bulletin PIP5094 from 2013, which belongs to an older, unrelated numbering. Fault effect: sensor C goes unwashed.
Possible causes
- Pump or solenoid valve of channel C with open or shorted winding high
- Harness to the sensor cleaning unit chafed or pinched at a bracket medium
- Controlling module output for channel C defective low
Symptoms
- Washing of sensor C stops; dirt, salt or insects stay on its window
- A wiper or air jet, if fitted, has to do the cleaning alone
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0131
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.