B0130
A/V Sensor Washer Fluid B Control Circuit
B0130 reports a fault where the module switches A/V sensor washer fluid B, the second of six channels running from B012F (A) to B0134 (F). A/V almost certainly stands for autonomous vehicle. Uber's cleaning layout (US20180015907A1) shows what such a channel switches: a compressor charges an air accumulator, one reservoir with a level sensor holds the fluid, and several pumps feed the cleaning heads, each started separately by the vehicle computer. Kautex sells its Allegro system for cameras and lidar on vehicles from level 1 to level 5, mixing water and air jets. Which sensor channel B serves is not published, and no carmaker documents B0130. With the circuit open or shorted, the sensor on channel B is no longer washed.
Possible causes
- Pump motor or valve coil on fluid channel B open or shorted high
- Corroded or loose connector at the pump, exposed to washer spray and road salt medium
- Output stage for channel B in the controlling module failed low
Symptoms
- The camera or lidar on channel B stays dirty while the others are cleaned
- Driver assistance or automated driving reports a blocked sensor or is withdrawn
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0130
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.