OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0128

DC/AC Converter A High Voltage Power Outlet "B" Circuit/Open

B0128 is the open-circuit fault for outlet B. Such a fault has to be told apart from a tripped protective device. In Ford's patent US11043801B2 each socket has a ground-fault interrupter whose breaker opens on a current imbalance and normally needs a manual reset; Ford adds an actuator so it can also be reset from a distance, plus test switches for the interrupters. Ford's SSM 49709 for the 2021 F-150 hybrid shows the everyday side: after the built-in Pro Power test the screen reports a ground fault until the reset button is pressed, which is normal behaviour. So rule out a tripped interrupter before chasing wiring. Where outlet B sits is not published, and no manufacturer documents B0128. Until repaired, socket B gives no power.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 28

Possible causes

  • Feed to outlet B interrupted at a connector or in the harness high
  • Ground-fault interrupter of outlet B defective or its reset actuator stuck medium
  • Moisture or dirt in socket B low

Symptoms

  • Socket B dead, ground-fault or outlet message on the screen
  • Reset does not restore power to socket B
  • Outlet circuits carry 120/240 V AC from a high-voltage source; work only with the system de-energised

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0128

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication