OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0127

DC/AC Converter A High Voltage Power Outlet "A" Circuit/Open

B0127 reports an open circuit to power outlet A of DC/AC converter A, one of the household-voltage sockets the converter supplies. Ford's patent US11043801B2, behind Pro Power Onboard, gives every socket its own conductor, on/off switch and ground-fault interrupter, fed by an inverter that draws on the traction battery, the motor-generator or both; sensors ahead of and behind each switch let the controller check the path. GM's program N222385490 shows how directly the outlets hang on the converter: 2023 Silverado and Sierra 1500 built without a working inverter had dead dash and bed outlets until it was retrofitted. The makers keep the position of socket A to themselves; B0127 appears in no public document. Outlet A stays dead; driving is unaffected.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 27

Possible causes

  • Wire or terminal in the feed to outlet A broken or pushed out high
  • Socket insert or its built-in protection defective medium
  • Output switch or relay for outlet A inside the converter faulty low

Symptoms

  • Outlet A supplies no power while other outlets may still work
  • Message that onboard power or the outlet is unavailable
  • Outlet circuits carry 120/240 V AC from a high-voltage source; work only with the system de-energised

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0127

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication