B0124
Night Vision Camera
B0124 points at the night vision camera, usually a far-infrared thermal sensor behind the grille or in the bumper; Teledyne FLIR says it has supplied more than a million automotive thermal sensors. Its exposed position causes most faults. GM's PIC6352A for Cadillac CT6, XT5 and XT6 traces failed camera learn procedures to loose or corroded LVDS connectors between camera B276 and its control module, often after water entered a damaged camera. Bentley's 2055858/1 for the Bentayga describes stone chips letting water in and corroding the camera cable, and Stellantis case S2408000119 warns that a cracked lens distorts the picture. None of these bulletins quotes B0124 itself. Night vision stops working; normal driving is unaffected.
Possible causes
- Water ingress through a stone-chipped or cracked camera window high
- Loose or corroded LVDS video connector between camera and control module medium
- Camera replaced but not learned or calibrated low
Symptoms
- Night vision image missing, distorted or pixelated
- Message such as night vision unavailable, service required
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B0124
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.