B0120
Fluid Reservoir Level Sensor E
B0120 relates to level sensor E. Ford's application US20190265715A1 describes a container for sensor cleaning whose level sensor measures conductance at a fixed height: air gives a resistance above roughly 1000 ohms, the slightly conductive fluid one below it. Because the fluid moves with the car, the computer filters the signal with acceleration and yaw rate, then estimates the remaining volume from pump activity, and it suspects a leak if the level falls while no washing is requested, in which case the vehicle may be routed to a service centre. Ford's patent US10569746B2 puts such a container on the roof beside the lidar. Letter E is not tied publicly to any tank, and no manufacturer documents B0120. Without the signal, remaining fluid can only be guessed.
Possible causes
- Electrodes fouled or fluid with unsuitable conductivity (e.g. plain distilled water) high
- Open or short in the sensor circuit medium
- Leaking reservoir or hose making the level drop unexpectedly low
Symptoms
- Refill warning too early, too late or constantly on
- Cleaning of exterior sensors may be restricted
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0120
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.