OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B011F

Fluid Reservoir Level Sensor D

B011F reports level sensor D. A recurring weakness of float switches in washer bottles is motion: fluid slopping around in corners or under braking lifts and drops the float and can set it spinning. Continental's patent US9003878B2 answers with a float guided in an angled carrier, ribs that stop it turning and an optional slosh guard, so one design suits side or bottom mounting. The other weak point is the wiring: FCA parts tip 68225064A tells technicians who face a false low-fluid message to check circuits W1 and W11 at a 48-way connector before condemning the float sensor. Which tank letter D refers to is left open by the makers, and nobody documents B011F publicly. Expect flickering or false level messages.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 1F

Possible causes

  • Loose or corroded pins at an intermediate harness connector high
  • Float moving freely with sloshing fluid, guide or slosh guard broken medium
  • Level sensor D itself defective low

Symptoms

  • Level warning switching on and off while driving, especially in bends
  • False low-level message with a full reservoir

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B011F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication