OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B011C

Fluid Reservoir Level Sensor A

B011C is the first of six fluid reservoir level sensors, A to F. J2012 does not say which reservoir each letter belongs to; the neighbouring codes deal with washing windows, cameras and other sensors, so washer tanks are the obvious candidates. The classic design pairs a magnet-bearing float with a reed switch: falling fluid lowers the float, and the contact flips. The application US20040200278A1 shows such a unit pushed through a rubber grommet in the tank side wall. FCA parts tip 9003109 adds a practical failure: a float that has turned out of its anti-rotation guides keeps reporting low fluid in a full bottle. No maker documents B011C publicly; the effect is a wrong or missing low-fluid warning.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 1C

Possible causes

  • Float jammed, rotated out of its guide or soaked with fluid high
  • Reed contact inside the sensor broken or welded medium
  • Leaking grommet letting fluid reach the plug, corroded terminals medium

Symptoms

  • Low-fluid warning stays on although the reservoir is full
  • No warning at all when the reservoir runs empty

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B011C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication