B0119
Camera Washer Actuator Q
B0119 names actuator Q. Land Rover's SSM76076 (2023) for the Defender (L663) from model year 2020 traces dripping headlamp washer jets and a dripping rear camera washer jet to a one-way valve in the feed pipe that no longer seals; the dealer tool runs a guided leak test and may call for a new rear camera washer hose with the valve. Headlamp and camera washing thus often share fluid and parts. ARaymond's cleaning brochure lists non-return valves, quick connectors and heated nozzles as building blocks of such circuits. A leaking valve is a hydraulic fault, not an electrical one; B0119 itself points to actuator Q or its wiring. Which camera Q serves is not published, and no maker documents the code.
Possible causes
- Pump or valve Q electrically open or shorted high
- Fluid dripping from a leaking jet or valve corroding the nearby actuator plug medium
- Chafed wire between module and actuator Q low
Symptoms
- Camera wash for the camera served by actuator Q does not respond
- Washer fluid level drops faster than usual if a valve is also leaking
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0119
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.