B0114
Camera Washer Actuator L
B0114 covers actuator L. Stellantis STAR case S2123000051 (2021, Jeep Grand Cherokee) describes a front camera washer pump that stopped spraying when the reservoir ran low although the cluster showed no low-fluid warning; a new pump, reservoir or level sensor did not help, and engineering was still investigating. Ford's German application DE102018109892A1 shows a quite different actuator: a magnet that squeezes a flexible chamber next to the camera, with one-way valves at inlet and outlet, triggered at ignition on, in reverse or by the wiper lever, plus an optional float reporting a low level. Washer level codes form their own row from B011C. Which camera L serves is not published; no maker documents B0114.
Possible causes
- Pump or actuator L damaged after running with a nearly empty reservoir high
- Open or shorted wiring to actuator L medium
- Level sensor not warning in time, so the actuator runs without fluid low
Symptoms
- Camera wash stops working while the reservoir is low, without a low-fluid warning
- Front camera view remains dirty after a wash request
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0114
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.