B0113
Camera Washer Actuator K
B0113 names actuator K. Even a working actuator is useless if the jet misses the lens. Stellantis TSB 23-049-22 Rev. A for 2022–2023 Jeep Grand Cherokee (WL) built between 13 April and 15 September 2022 found the liftgate nozzle of the digital rearview mirror camera pointing the wrong way; it is unclipped, turned 180 degrees and refitted, after which the mirror is reset by holding its plus and minus buttons for about 15 s. Bowles' application US20140060582A1 explains the geometry: a nozzle offset roughly 10 to 30 mm beside the lens, aimed within about 1 to 20 degrees of its surface and kept out of the field of view. A misaimed jet sets no code; B0113 concerns the actuator circuit, for a camera that is not published.
Possible causes
- Open or short in the circuit of valve or pump K high
- Wire fatigue in the liftgate hinge area medium
- Plug not reconnected after the camera or nozzle was removed low
Symptoms
- Camera wash does not run for the camera served by actuator K
- Digital mirror or reversing picture stays dirty after the wash is requested
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0113
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.