B0111
Camera Washer Actuator H
B0111 is the J2012 code for camera washer actuator H, but the number has an older second life. Toyota's bulletin T-SB-0069-12 (revision 2, 2014) for the 2004–2009 Sienna lists B0111 together with B0116 as an open side-airbag squib circuit with the SRS lamp lit, repaired in the floor harness. On that van the code has nothing to do with washing, and a scan tool showing the generic title would mislead. In the generic sense, actuator H is one of the pumps or valves that suppliers such as Kautex offer for ADAS cleaning, next to heated nozzles, heated hoses, connectors and level sensors. No manufacturer publishes which camera H means or documents B0111 as a washer code.
Possible causes
- Pump or valve H open, shorted or seized high
- Water ingress or corrosion in the plug of actuator H low
Symptoms
- Camera served by actuator H is not washed
- No washer fluid leaves the nozzle served by actuator H when the wash is requested
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0111
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.