B0110
Camera Washer Actuator G
B0110 names actuator G. Not every washed camera sees visible light. Bentley's product information 2051045 (2023) concerns the infrared night-vision camera in the front bumper of Bentayga, Continental GT/GTC and Flying Spur: fluid dripping from its washer jet is cured by a new non-return valve, and the camera needs recalibrating only if it is replaced itself. An earlier note (2021) replaced the short link hose between that jet and its supply connector instead. Valeo's cleaning range likewise lists infrared cameras next to visible cameras and lidar. Whether G stands for a night-vision camera is not published, and no manufacturer documents B0110. If set, the night-vision image may blur in rain or slush.
Possible causes
- Valve or pump G for the camera jet electrically open or shorted high
- Harness damage in the lower bumper area after a parking knock or repair medium
- Output stage of the controlling module defective low
Symptoms
- Night-vision or front camera image stays smeared; the camera jet does not spray
- Assistance functions relying on that camera may report limited availability
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B0110
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.