OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B010B

Camera Washer Actuator B

B010B covers actuator B. A common way to reach a reversing camera is a branch off the rear-window washer line with an electric switching valve. Asmo's application US20120266926A1 (2011) describes a solenoid spool valve: unpowered it feeds the rear-screen nozzle, energised it diverts fluid to the camera nozzle. The coil is powered once reverse is engaged, and the washer switch then sprays the camera, for about two seconds in one example. Land Rover's bulletin JLRTB02100NAS1 for the 2022 Range Rover shows the plumbing side: a loose rear washer connector stopped both rear-window and camera wash, and hoses swapped at that connector made the rear-window switch wash the camera instead. Whether B is a rear camera is not published; no maker documents B010B.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 0B

Possible causes

  • Coil of the rear-window/camera switching valve open or shorted high
  • Broken wire in the tailgate or boot-lid harness passage to the valve medium
  • Reverse-gear signal that enables the camera wash not reaching the module low

Symptoms

  • In reverse the washer switch no longer sprays the reversing camera
  • Rear window may be washed instead of the camera, or neither

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B010B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication