OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B010A

Camera Washer Actuator A

B010A opens a row of eighteen camera washer actuators, lettered A to S with I left out. The actuator is the electrically driven part that sends fluid to one camera lens: a pump of its own or a valve on a shared line. Continental's patent US11673532B2 (filed 2019) shows the layout such a row implies: front, side and rear cameras, each with its own nozzle and valve, fed by one or more pumps and switched by a controller that washes when the picture looks blocked and always cleans the rear lens in reverse. Solero sells electromagnetic valves in 2/2- and 3/2-way form for this job, and Valeo builds complete camera cleaning systems including the control unit. Makers keep the camera behind letter A to themselves; B010A appears in no public manufacturer document. The camera keeps working; only its wash is lost.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 0A

Possible causes

  • Valve coil or pump motor of actuator A open or shorted high
  • Corroded or loose plug at actuator A, which sits in the splash zone near the camera medium
  • Driver stage in the controlling module defective low

Symptoms

  • The camera assigned to actuator A is no longer washed, neither on request nor automatically
  • Camera view stays dirty in rain, mud or road salt; a camera blocked message may appear

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B010A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication