B0108
LIDAR Washer Actuator C
B0108 covers lidar washer actuator C. Robotaxis with several lidars, for example on roof and corners, are where a third circuit would fit. Valeo lists a heated telescopic lidar nozzle, a 2021 PACE award finalist, and says it supplies cleaning systems with ECU and software for private cars and robotaxis; a telescopic nozzle adds a moving part that can stick in frost. Solero's 4/3-way valve distributes fluid centrally so fewer DC pumps are needed, meaning actuator C may be a valve position rather than a pump. Jalopnik noted in 2018 that Waymo cleaned its lidar domes with small wipers and that Cruise was building its own cleaning hardware. No manufacturer assigns C publicly or documents B0108.
Possible causes
- Telescopic nozzle C stuck by ice or dirt, actuator overloaded high
- Distribution valve position C not switching medium
- Nozzle heater or shared connector on circuit C faulty low
Symptoms
- Lidar C not cleaned, especially in frost or snow
- Automated driving refuses to engage or hands back control
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0108
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.