B0107
LIDAR Washer Actuator B
B0107 is the second lidar washer actuator. Why a car would need several becomes clear in Uber's 2016 patent: its roof lidar is washed by three separate nozzle units, each with its own pump and check valve, fed from one reservoir, and the controller normally sprays fluid first and then dries with air. A fault on one pump leaves only that segment of the window dirty. ARaymond's cleaning brochure shows multi-outlet lidar nozzles and integrated electromagnetic valves as an alternative to one pump per nozzle. Kautex supplies complete reservoir, pump and nozzle sets for camera and lidar cleaning. B0107 has no published meaning at any vehicle maker, and whether B is a second lidar or a second nozzle on the same one is not stated anywhere.
Possible causes
- Washer pump B worn or its motor open high
- Check valve or line to nozzle B blocked, pump runs against closed path medium
- Chafed wiring to actuator B low
Symptoms
- One section of the lidar window stays dirty after washing
- Repeated cleaning requests and lidar degraded warning
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for B0107
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.