OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0102

Sensor Cleaning Air Blower Actuator A Control

B0102 narrows the blower A problem down to its control path: the controlling module sees a wrong voltage or current on the line that commands blower A, typically an open circuit, a short to ground or a short to supply. In Ford's lidar cleaning patent US10569746B2 a computer opens airflow from a blower or compressor by driving an electric solenoid valve and may modulate it; when window opacity exceeds about 30 %, air runs first and autonomous mode may be dropped. Ford's later patent US12115948B2 places the blower beside the sensor on its bracket, so its feed runs into an exposed pod. Valeo notes that an obstructed lens can end automated operation. No carmaker publishes B0102. Unlike B0100, the blower itself may be fine here.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 02

Possible causes

  • Broken control wire or pin between module and blower A high
  • Control line of blower A shorted to ground or to battery voltage medium
  • Output stage in the cleaning or maintenance module defective low

Symptoms

  • Blower A never starts although cleaning is requested
  • Blower A runs constantly when the line is shorted to supply
  • Sensor blocked message and limited assistance features

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for B0102

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication