OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0100

Sensor Cleaning Air Blower Actuator A

B0100 is the general fault for air blower A in a sensor cleaning system, i.e. the fan or motor unit itself rather than its wiring or relay (those are B0102 and B0104). Such blowers keep camera lenses and lidar windows clear of droplets, dust and insects. Ford's patent US12115948B2 mounts a blower on the sensor bracket; it pulls outside air through an intake duct and pushes it out across a cylindrical lidar window and a camera lens. In Ford's roof-mounted sensor tiara for its self-driving test fleet, slots release an air curtain that deflects most bugs, and air also dries a lens after washing. Which blower is A is up to the maker. No vehicle manufacturer documents B0100 publicly. A dead blower lets dirt build up until the sensor reports itself blocked.

SystemBody
Typegeneric / SAE
GroupB0
Range / number1 / 00

Possible causes

  • Blower A motor worn, seized or with an open winding high
  • Impeller blocked by ice, leaves or debris in the intake duct medium
  • Corroded or loose plug directly at blower A low

Symptoms

  • Sensor blocked or cleaning fault message
  • Driver assistance or automated driving functions limited or switched off
  • No airflow audible or felt at the sensor outlets

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B0100

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication