OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00F7

Third Row Right Inflatable Seat Belt Deployment Control

B00F7 closes the inflatable-belt block with the right seat of row three. No manufacturer documents it. The nearest real case is one row further forward: on the 2014–2016 Ford Explorer, the dealer bulletin for programme 21B11 names B141C as the right and B141B as the left second-row harness code and has technicians re-route or repair the seat pigtail when either appears. Ford's 2018 owner manual puts the rear inflatable belts in the shoulder webbing of the outboard second-row seats only; on the right of row three there are child-seat anchors but no bag. Mercedes lists beltbags for the outer rear belts of the S-Class, and Autoliv's 2002 patent shows one inflator feeding belts through a gas guide. With B00F7 present, the airbag lamp stays on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / F7

Possible causes

  • Chafed wires in the right rear seat harness, as seen one row forward on the Explorer (B141C) high
  • Restraint module variant coding expects a right third-row inflatable belt medium
  • Open or shorted igniter in the right third-row belt inflator low

Symptoms

  • Airbag lamp stays on after start-up check
  • Right third-row inflatable belt not armed
  • Safety note: never probe the inflator circuit with a test lamp; disconnect battery, wait, leave it to a specialist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00F7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication