OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00F6

Third Row Center Inflatable Seat Belt Deployment Control

B00F6 names the deployment circuit for an inflatable belt at the middle seat of row three. That seat is the least likely place for such a belt: the series systems on record sit at outboard rear seats, Ford's Explorer only in row two and Mercedes' beltbag on the outer rear belts. The 2017 Mercedes GLS manual, for a three-row SUV, lists pyrotechnic tensioners and force limiters for its third-row belts, but no beltbag there. NHTSA's belt test series likewise used the inflatable Explorer belt from a second-row seat. Joyson's belt-attached restraint study for new interior layouts shows where such bags might spread. No maker publishes B00F6; if set, the airbag lamp is on and that belt would not inflate.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / F6

Possible causes

  • Airbag module coded for a centre third-row inflatable belt the vehicle does not have high
  • Inflator plug of the centre belt loosened when the third-row seat was folded or removed medium
  • Igniter in the centre belt inflator out of its resistance window low

Symptoms

  • Airbag warning lamp lit
  • Centre third-row inflatable belt would not inflate in a crash
  • Safety note: igniter-equipped part – battery off, observe waiting time, work only in a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00F6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication