OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00F3

Second Row Center Inflatable Seat Belt Deployment Control

B00F3 refers to an inflatable belt at the centre seat of the second row. No manufacturer documents the code, and the known systems leave this seat out: Ford's 2018 Explorer manual limits its inflatable belts to the outermost second-row positions, and Mercedes fits its beltbag to the outer rear belts (S-Class manual 2017); the E-Class manual of the same year lists the belt air bag as a frontal-impact device. A centre version would be harder to package because the gas usually enters at the buckle or lower anchor; NHTSA's belt tensile study notes that the 2011 Explorer belt needed a retractor in the lap loop because its inflator was attached to the buckle. If set, the airbag lamp is lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / F3

Possible causes

  • Restraint module configured for a centre inflatable belt not present in the vehicle high
  • Connector at the centre buckle inflator under the bench disconnected medium
  • Igniter of the centre belt inflator open or shorted low

Symptoms

  • Airbag indicator remains on
  • Rear centre belt would not inflate in a crash
  • Safety note: pyrotechnic or stored-gas inflator – only work with the battery disconnected and the wait time observed, at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00F3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication