OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00F2

Second Row Left Inflatable Seat Belt Deployment Control

B00F2 covers the inflatable belt at the left outer seat of row two, the position where such belts actually reached production. Ford offered them from the 2011 Explorer; its 2018 owner's manual puts the bag into the shoulder part of the belts at both outer seats in row two, filled with cooled gas at lower pressure, deployed in frontal, side and rollover crashes and monitored by the same module and lamp as the front belts. Ford itself logs faults under its own codes B141B/B141C: programme 21B11 (Explorer 2014–2016) traces them to damaged seat harness wires at the rear inflatable belt connector. Mercedes-Benz fits its beltbag to the outer rear seats of the S-Class. Neither publishes B00F2. Airbag lamp on when set.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / F2

Possible causes

  • Internal wire damage in the second-row seat harness at the belt connector (Ford programme 21B11) high
  • Plug of the inflator under the left rear seat loose after folding or removing the seat medium
  • Fault in the belt inflator igniter low

Symptoms

  • Airbag warning light on
  • Left rear inflatable belt may not deploy in a crash
  • Safety note: the belt holds a stored-gas or pyrotechnic inflator – battery off, wait time, work only at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00F2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication