B00F1
Passenger Inflatable Seat Belt Deployment Control
B00F1 is the front passenger counterpart of B00F0, reserved for an inflatable belt at that seat. No manufacturer documents it, and no series vehicle is publicly known to have a passenger inflatable belt; Mercedes' S-Class manual offers the beltbag only for the outer rear belts. A passenger version would still face the same engineering choices as the patents show: Allied Chemical patented as early as 1972 a buckle that routes gas from a floor-mounted inflator through tongue and buckle into lap and shoulder belt, so the belt itself needs no wires, while Autoliv's 2002 design mounts separate inflators on the seat back. The airbag module would watch the igniter loop and set B00F1 for an open, a short or bad resistance.
Possible causes
- Module coded for a passenger inflatable belt that the car does not have high
- Connector at the buckle-side inflator under the passenger seat loose medium
- Seat wiring damaged by objects under the seat or by seat movement low
Symptoms
- Airbag lamp lit in the cluster
- Passenger belt cannot inflate in a crash
- Safety note: pyrotechnic belt inflator – disconnect the battery, respect the wait time and have repairs done by a specialist workshop
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00F1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.