B00F0
Driver Inflatable Seat Belt Deployment Control
B00F0 is the firing circuit for an inflatable belt at the driver's seat: a section of webbing that a gas source fills in a crash so the load spreads over a wider area of the chest. The production inflatable belts known from Ford and Mercedes-Benz sit only at rear outer seats; no carmaker documents B00F0. The idea for front seats is old and well described in patents, for example a Daimler design of 2010 with the gas generator at the lower anchor beside the B-pillar and folded webbing held by tear threads, and an Autoliv design with inflators mounted on the seat back. Joyson also lists a belt-attached restraint supplement among its airbag innovations. If the code is set, the airbag lamp comes on.
Possible causes
- Airbag module variant expects a driver inflatable belt that is not fitted high
- Plug of the belt gas generator at the lower anchor or seat loose or corroded medium
- Lead to the inflator chafed by seat adjustment medium
- Igniter of the belt inflator faulty low
Symptoms
- Airbag warning lamp on
- Driver belt would not inflate in a crash
- Safety note: the belt contains a pyrotechnic gas generator; work only de-energised (battery off, wait time) and at a specialist workshop
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00F0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.