OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E8

Third Row Center Seat Belt Pretensioner C Deployment Control

B00E8 closes the C row of the table with the centre seat of the third row. No manufacturer publishes it, and the one public list that uses this block, Mercedes-Benz LI54.21-P-070658, stops at a left and a right third-row retractor (B00E7, B00E6). A centre tensioner in row three would mostly appear in large vans or SUVs with a three-seat rear bench. Joyson's retractor pretensioner is compact enough to go into a seat frame, which is where a centre unit would have to live. IIHS frontal tests of 2019 compared rear dummies in vehicles with standard belts and with tensioners plus load limiters, and noted such rear countermeasures are not yet widespread. If B00E8 is set, the airbag lamp is on and the centre belt is not tightened.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E8

Possible causes

  • Connector of the seat-mounted centre retractor unplugged after removing the rear bench high
  • Restraint module coded for a three-seat third row on a two-seat vehicle medium
  • Squib of the centre retractor faulty low

Symptoms

  • Airbag warning lamp illuminated
  • Centre seat of the third row without belt tensioning
  • Safety note: contains a pyrotechnic charge – no work without disconnecting the battery and waiting; leave it to a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication