OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E7

Third Row Left Seat Belt Pretensioner C Deployment Control

B00E7 marks the C-stage tensioner of the third row's left seat, listed after its right-hand twin B00E6. Mercedes-Benz documents it: LI54.21-P-070658 uses B00E713 when the firing pill of the left third-row tensioning retractor shows an open, in the same list as the rear and driver retractors. In that topic the remedy does not start with the tensioner but with fault-tracing the wire and reconnecting the restraint unit plugs; only a recurring fault calls for a new control unit of at least level Q4. Joyson describes this kind of pyrotechnic retractor, which can sit in the body or the seat structure. No other maker publishes B00E7. Airbag lamp on; the left third-row occupant is not tensioned.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E7

Possible causes

  • Raised resistance at the restraint unit plug high
  • Left third-row retractor connector disturbed during trim or seat work medium
  • Control unit below the required level, fault keeps returning low
  • Retractor squib open internally low

Symptoms

  • Airbag lamp or fixed SRS message
  • No pretensioning for the left third-row seat
  • Safety note: pyrotechnic device – disconnect the battery and wait before touching it; have it serviced at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication