B00E6
Third Row Right Seat Belt Pretensioner C Deployment Control
Note the order in this block: B00E6 is the right seat of the third row, while B00E7 is the left. Mercedes-Benz fills B00E6 with the retractor tensioner on that seat: LI54.21-P-070658 (first issued December 2019 for A-Class and CLA, extended to GLB in version 4) reads B00E613 as an interrupted igniter in the tensioning retractor on the right of row three. The stated cause is again contact resistance at the airbag unit plug. Mercedes' GLS manual of 2017 confirms that the brand gives third-row belts their own tensioners and force limiters. No other maker publishes the code. With B00E6 stored, the airbag lamp is on and the right third-row belt will not be tightened.
Possible causes
- Contact resistance at the airbag unit connector (Mercedes LI54.21-P-070658) high
- Plug of the right third-row retractor behind the cargo trim loose medium
- Wiring in the rear wheel arch area pinched by trim or cargo low
- Squib of the right third-row retractor defective low
Symptoms
- SRS message or airbag warning lamp
- Right third-row belt stays slack in a crash
- Safety note: work on this pyrotechnic retractor only de-energised (battery disconnected, wait time) and preferably by a specialist
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00E6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.