OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E5

Second Row Center Seat Belt Pretensioner C Deployment Control

B00E5 covers a C-stage tensioner at the middle seat of row two. No manufacturer publishes it. Rear centre tensioners are scarce: Mercedes' 2017 GLS manual names tensioners only for the outer second-row belts, and the Mercedes bulletin that assigns B00E3 and B00E4 to the outer rear retractors has no centre entry. IIHS research on rear occupants (2020) states that belt countermeasures for the rear are available yet rarely fitted, so such slots often stay empty. If a vehicle does carry a centre retractor or buckle tensioner, the airbag module watches its squib like any other and sets B00E5 for an open, a short or a resistance drift; the warning lamp then comes on and that seat loses its tensioning.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E5

Possible causes

  • Centre-seat tensioner plug under the rear bench not engaged high
  • Module coded for a centre tensioner that the vehicle lacks medium
  • Lead damaged where it passes the split or folding rear bench hinge medium

Symptoms

  • Airbag lamp on
  • Rear centre passenger may not be held back early in a frontal crash
  • Safety note: the tensioner holds a pyrotechnic charge – battery off, wait time observed, repair at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication