OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E4

Second Row Right Seat Belt Pretensioner C Deployment Control

B00E4 belongs to the outboard seat on the right in the back and its C-stage tensioner. Mercedes-Benz uses it in that sense: every version of LI54.21-P-070658 seen here (December 2019 to June 2020) lists B00E413 as an open in the squib of the tensioning retractor at the rear right. The topic blames higher resistance at the SRS unit connector rather than the tensioner and tells technicians to trace the wire, reseat the plugs and replace the unit only on recurrence. The retractor sits behind the rear trim or in the seat and winds the webbing back when fired, as GM's rescue guide and Joyson explain. No public bulletin from another maker cites B00E4. While the code is stored, the airbag lamp or SRS message stays on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E4

Possible causes

  • Poor contact at the SRS control unit plug (Mercedes A-Class/CLA/GLB) high
  • Plug at the right rear retractor loose after trim removal medium
  • Airbag control unit itself faulty (fault returns after reconnecting) low
  • Squib in the right rear retractor open low

Symptoms

  • SRS message or airbag lamp permanently displayed
  • Right rear passenger loses shoulder-belt tensioning
  • Safety note: pyrotechnic tensioner – only work on it with the battery disconnected and after the wait time, ideally at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication