OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E3

Second Row Left Seat Belt Pretensioner C Deployment Control

B00E3 is the C-stage tensioner of the left outer rear seat, and two makers document it codegenau. Stellantis case S2408000089 (Jeep Wrangler 2023) has the occupant restraint controller store B00E3-13, named there for the retractor tensioner at the left of row two, after a service visit; the fix was to secure connector D3244A with a push-pull-push check, no parts. Mercedes-Benz topic LI54.21-P-070658 (A-Class, CLA, later GLB) reads B00E313 as an open squib in the tensioning retractor behind the left rear passenger, usually caused by high contact resistance at the airbag unit plug; reconnecting comes first, a new control unit only if the fault returns. So C here means the retractor, as Joyson's pyrotechnic retractor describes. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E3

Possible causes

  • Retractor pretensioner plug not latched after trim or seat work (Jeep Wrangler 2023, connector D3244A) high
  • High contact resistance at the airbag control unit connector (Mercedes LI54.21-P-070658) medium
  • Lead to the left rear retractor chafed at the C-pillar or seat frame medium
  • Faulty squib in the retractor pretensioner low

Symptoms

  • Airbag warning lamp or SRS message in the cluster
  • Left rear shoulder belt is not retracted in a crash
  • Safety note: the retractor pretensioner is pyrotechnic; work only with the system de-energised (battery off, wait time) and preferably at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication