OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E2

Third Row Center Seat Belt Pretensioner B Deployment Control

B00E2 would report the firing circuit of a B-stage tensioner at the centre seat of the third row. This is about the rarest slot in the pretensioner table: a centre seat in row three is uncommon, and a second tensioner stage on it even more so. No manufacturer documents the code. For comparison, the third-row tensioners in Mercedes vehicles are listed only as left and right retractor loops (B00E7/B00E6 in LI54.21-P-070658), and the GLS manual of 2017 likewise speaks of retractor tensioners. A B stage would act on the lap section, as Joyson's lap pretensioner does in combination with a retractor. If the code appears, check first whether the module's equipment coding matches the seats actually fitted.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E2

Possible causes

  • Module variant coding expects a centre B stage that is not installed high
  • Plug under the third-row centre seat disconnected after seat removal medium
  • Squib of the centre lap tensioner open or shorted internally low

Symptoms

  • Airbag indicator stays on after the self-test
  • Centre occupant of the third row may lack lap-belt tensioning in a crash
  • Safety note: pyrotechnic restraint component – disconnect the battery, wait the specified time and have the work done by a specialist

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication